Untethered Jailbreak for iPod Touch 2nd Gen!

Option 1
Quickfreedom(Kind of like Quickpwn)

Option 2

No more coding when you accidently turn off your iPod! Untethered is out

BEFORE you begin, restore your iPod Touch clean to it's factory state.
As with every other tutorial you need the C++ redistributable and LIBusb
(if you've jailbroken before you should already have them)

Download Libusb here
Download Microsoft C++ here

1.First download Unofficial Redsnow 2.0 for windows and extract the folder to your desktop

2. Get the 2.2.1 Firmware Here

3. Rename the 2.2.1 ipsw to OriginalFW.ipsw and place it in /IPSW

4. Run IPSW.bat (It will take a while)

5. Replace the llb.n72ap.RELEASE.img3 in your new JB.ipsw with the one located under /IPSW preferably using 7zip to avoid corruption.
(you can also use winrar, by either changing the file extension to .rar or open it up as a .rar file some other way and deleting the lib.n72ap.RELEASE.img3 and replacing it with the new one)

6. Place your iPod Touch 2G into DFU mode and run RUNME.exe

7. Shift + Restore to JB.ipsw in iTunes and your done!!!

Jailbreak iPod Touch 1G, iPhone 2G, iPhone 3G on 2.2.1! Quickpwn

CHECK THE POST BELOW THIS TO BACKUP ALL YOUR CYDIA APPS/THEMES
THERE IS NOW A JAILBREAK FOR MAC USERS ALSO CHECK BELOW

Hey guys,
Today I'm going to show you how to Jailbreak
the new firmware 2.2.1 using Quickpwn

Step 1: Here is the link for Quickpwn 2.2.5(windows)
Quickpwn 2.2.5
alternate link:(windows)
http://www.megaupload.com/?d=ROVOVTOJ
FOR MAC USERS
http://quickpwn2-2-1.googlecode.com/files/QuickPwn_2.2.5.dmg
**Unzip the folder and open QuickPwn.exe"
If for some reason Quickpwn isn't opening up it's because you do not have .net framework installed. Click this link to install it. http://tinyurl.com/2etrzb

Step 2: Make sure your device is updated to
Firmware 2.2.1***
(If you need the firmware 2.2.1 download link check my blog)
Step 3: Make sure your device is connected to
your computer via USB then open up Quickpwn

Step 4: Press the blue arrow to go next
-Quickpwn should recognize your firmware
automatically if it is 2.2.1 and a green checkmark
will appear next to your device name.

Step 5: Press the blue arrow to go to the next
page. ** Decide what you would like to have.
Obviously you should add cydia. Installer is
optional and so is boot logos.

Step 6: Press the blue arrow to go the next page
-Again, make sure you're connected via USB

Step 7: Press Next and get ready to Jailbreak!
Follow the directions on the screen
You should get a white screen if you did it
correctly. Then it will say "Downloading Jailbreak
data"
- Once you get the checkmark you just have to
wait for your phone to finish jailbreaking and
you're all done!

Need any downloads for firmware 2.2.1?
Firmwares
http://www.felixbruns.de/iPod/firmware/

Voltage Tool- Easiest way to Jailbreak iPod Touch 2nd Gen

This Post was updated, because many people were having problems with the previous GUI.

The following tutorial was made by xPerFeXioN from youtube.
The video was found by username: Teek <-- Thanks! There is a lot of swearing towards the end of the video..just a heads up



Downloads

• Jailbreak+Rebooter

Have any questions? Let me know

Tether Jailbreak iPod Touch 2nd Generation(Windows Step by Step)

What you'll need:
redsn0w lite
XPwn
iRecovery and libusb
2.1.1 IPSW
2.2.1 IPSW
________
What you may need:
If for some reason your iPod will refuse to get a white screen when it is supposed to
download this to end iPod Services and Mobile Services(should make it work)
End Services batch file

-Submitted by Username: jake fox
Thank you.

MAKE SURE YOU ARE ON FIRMWARE 2.2.1 BEFORE YOU START

1.) Extract redsn0w lite and XPwn to your Desktop

2.) Save (or move) the 2.2.1 IPSW into the XPwn folder and rename it OriginalFW.ipsw















3.) In the rslite101 folder, there should be a FirmwareBundles folder; copy the iPod2,1_2.2.1_5H11.bundle into your XPwn\FirmwareBundles\ folder.










4.) Open up a Command Prompt (type cmd in the Search bar if on Vista).











5.) In Command Prompt, cd to the Xpwn directory and do "ipsw OriginalFW.ipsw patchedFW.ipsw -s 700 bundles\Cydia.tar"
Some people are having trouble with the cd command. Just type cd, then a space, and then drag the little folder icon of where you want to cd(so in our case drag the Xpwn folder into the command line) in this into the command prompt and press enter.
Should look something like this after you drag the folder in.










IF YOU GET AN ERROR HERE SAYING "COULD NOT FIND IPSW" take out the .ipsw after OriginalFW in the xpwn folder

After you have your command prompt looking like that type in "ipsw OriginalFW.ipsw patchedFW.ipsw -s 700 bundles\Cydia.tar"

Should say hashing ipsw





















6.) Put your iPod Touch in DFU mode

Step 1. Turn off your iPod.

Step 2. Press and hold home button for 5 seconds then continue holding home button and press power button for 10 seconds

Step 3. release the power button but continue holding the home button down.

Step 4. Open iTunes and wait for it to tell you that its in restore mode..

IF YOU SEE APPLE LOGO YOU DID IT WRONG. YOUR iPOD SHOULD BE A BLACK SCREEN WHEN YOU'RE ON DFU MODE*****

7.)Extract all files in the iRecovery RAR to your Desktop and open the iRecovery folder, there should be an installer for libusb located here.
If you haven't already installed libusb, please do so now.
If you're running Vista or 7, please right click the .exe and select Properties, then click the Compatibility tab, then select Windows XP (Service Pack 2) from the drop-down menu.
After install, a restart may be required.

8.)Open another Command Prompt (or use the one you used before, if it is still up) and type the following:

Code:

cd C:\Users\yourusername\Desktop\iRecovery\iRecovery_SVN

or you could type cd, space, and drag the iRecovery_SVN folder into the command prompt










IF YOU GET A SIDE-BY-SIDE ERROR CLICK THIS LINK AND INSTALL C++


9.) Extract your 2.1.1 iBSS and 2.2.1 iBSS and iBoot.
To do so, right click your 2.1.1 IPSW and select Open with> WinRAR archiver.
Navigate to the Firmware\dfu directory, then drag iBSS.n72ap.RELEASE.dfu into your iRecovery_SVN folder.
Rename it iBSS211.dfu.
Now, open up your PatchedFW.IPSW from the xpwn folder using WinRAR.
First, navigate to the Firmware\dfu folder and drag iBSS.n72ap.RELEASE.dfu into your iRecovery_SVN folder.
Rename is iBSS221.dfu.
Now, navigate to the Firmware\all_flash\all_flash.n72ap.production folder.
Extract iBoot.n72ap.RELEASE.img3 to your iRecovery_SVN folder.
Rename it iBoot221.img3.















10.)Bring up your Command Prompt again and execute the following:

Code:

iRecovery -f iBSS211.dfu

Your iPod's screen should turn white.
If it doesn't, unplug your iPod and wait 10 seconds, then plug it back in.











11.)11.) In the same Command Prompt, enter the following:

Code:

iRecovery -s
arm7_stop
mw 0x9000000 0xe59f3014
mw 0x9000004 0xe3a02a02
mw 0x9000008 0xe1c320b0
mw 0x900000c 0xe3e02000
mw 0x9000010 0xe2833c9d
mw 0x9000014 0xe58326c0
mw 0x9000018 0xeafffffe
mw 0x900001c 0x2200f300
arm7_go
arm7_stop
/exit

Just to clarify, you will hit enter after each of these commands.

12.) Restore to your PatchedFW.ipsw firmware using iTunes (Hold shift and press restore and click the patchedfw.ipsw that is in the Xpwn folder)

13.) After your restore is complete, put you iPod into DFU mode, you'll have to apply the patch again to boot.
You will also have to do these same things each time you boot from now on:

Code:

iRecovery -f iBSS211.dfu
iRecovery -s
arm7_stop
mw 0x9000000 0xe59f3014
mw 0x9000004 0xe3a02a02
mw 0x9000008 0xe1c320b0
mw 0x900000c 0xe3e02000
mw 0x9000010 0xe2833c9d
mw 0x9000014 0xe58326c0
mw 0x9000018 0xeafffffe
mw 0x900001c 0x2200f300
arm7_go
arm7_stop
/exit
iRecovery -f iBSS221.dfu
iRecovery -s
go
/exit
iRecovery -f iBoot221.img3
iRecovery -s
go
/exit

If you iPod is not recognized after sending the 2.1.1 iBSS, unplug it and plug it back in, then try iRecovery -s.
You may need to unplug your iPod after sending each iBSS, also.

(SORRY I DON'T HAVE PICTURES FOR THIS STUFF. I DON'T HAVE AN iPOD TOUCH 2nd Generation So i showed you as much as I could without it)

14.) Your iPod should now be booting; enjoy you tethered jailbreak.

I'd like to give credit to jfb392 from iPod Touch Fans and AriX from the same site.
**Pictures were all hosted by myself, ShabzCoHelp**

TROUBLESHOOTING

P = Problem
A = Answer

P: I'm on Step 13 and when I type the last "go" it says: "Memory Image not Valid"
A: Install C++ and then re do Step 13
-----------------
P: I did the whole tutorial and it didn't work!
A: Make sure you have 2.2.1 iPod Software, Not 2.2
-----------------
P: I can't put my iPod into DFU mode. (How do I put my ipod in DFU mode)
A: Hold home button for 10 seconds, Hold Home + Power for 10 more seconds, Release Power and keep holding home until you hear a "Ding Dong" sound. You are holding home throughout the whole process. (Ding Dong Sound: When a USB connects to a computer it makes a "DING DONG" sound)
----------------
P: I get a side-by-side configuration error in iRecovery.exe
A: Install C++
-Courtesy of user, TMZion for providing this Troubleshooting section-Thanks :D
P: Cannot find .ipsw in step 5?
A: take out the .ipsw after OriginalFW.ipsw in ur xpwn folder

I hope this helps you guys out
any questions?
shabzcohelp@gmail.com
or write in the shoutbox
**LET ME KNOW IF IT WORKS FOR YOU** i worked hard on it :]